Posts Tagged ‘save’

  1. Get paid $$ to recycle your refrigerator!

    January 21, 2012 by Karl

    refrigerator berryberryberryberry

    Once freon came into the public eye as an atmosphere contaminate about 20 years ago, it started costing the average home owner anywhere from $25 to $75 to have a refrigerator, freezer, or air conditioner picked up from the curb. Now your electric company may actually pay you to pick it up and recycle it!

    Many of the electric utility companies are now offering rebates and incentives to make the move to more energy-efficient appliances.

    Check out PPL’s appliance recycling program HERE. Other electric companies across the country have similar programs.  Check with your local electricity provider, to see if they have a similar program!

    PECO has incentives on the buying side HERE.

    Also, please check out the Energystar link HERE for more information.



  2. Save money by repairing your electric dryer.

    January 11, 2012 by Karl

    Electric Dryerberryberryberryberry

    This article will show you how to save money by repairing your own electric dryer.  Electric dryers are relatively simple machines to fix.  With a little knowledge, the average home owner can fix their drier, no matter what the problem is.  Please note that gas dryers are not something I would encourage the average home owner to delve into.

    Electric dryers can last forever once you know how they work and how to fix them. They only generally have three basic areas that go wrong: The motor & drive belt which rotates the tumbler, the electric heater assembly, and the timer that controls it all. Of course each of the parts in these areas have their own price tag, and the owner needs to decide if it makes more sense to repair it, or replace it.   I would argue that if you can repair it yourself, it is never a good financial decision to replace an electric dryer. The most expensive part can usually be purchased somewhere online for around $100. Usually it is something very simple that goes wrong with one of these machines.

    Here are the most common things that generally go wrong with electric dryers.

    Is there power at the outlet?

    Let’s start with the very simple.  Is the houses circuit breaker tripped? Some circuit breakers actually look like they are on, but are actually tripped. The only way to be sure is to turn it off and then back on again. Unfortunately electric driers use 240 volts, so there is no other simple test to check that you have power at the outlet unless you happen to have a multimeter, and know how to use it. You can set the timer (mechanical timer), to see if it moves, but this isn’t foolproof.

    Dryer turns on, but the drum is not spinning:

    This is the simplest fix of all. It is the belt. Usually you can get the belt for less than $20 locally, or less than $10 online. I would highly recommend replacing the Idler wheel (the wheel that keeps tension on the belt) at the same time. Replacing a belt is a fairly simple procedure, and can usually be done in less than 30 minutes on most dryers. Search for your specific model number in order to find out the procedure for your dryer. Usually it is a matter of turning off the power, lifting up the top, unscrewing the front, and securing the new belt in place. You may need to print out a drawing of the path of the belt, because it can be a little confusing the first time you put one in.

    Dryer runs fine, but it takes forever to dry my clothes:

    This is usually due to lint in the dryer vent. Depending on the length of your dryer vent, this can be simple or more involved. Either way, all you should need in order to take care of this is a screwdriver. A large capacity vacuum would also be handy. Remove the hose from the back of the dryer, and use the vacuum (or your hand) to clean the lint out of the pipes. Remove each section as needed to clean the lint out of there. Make sure the path is clear all the way to the vent cap outside. If there is a lot of moisture mixed in with the lint, then it is possible that the distance of your dryer vent is too long. You may need to put in a booster fan in order to get it to vent properly.

    Dryer turns on, but there is no heat:

    This is usually either the thermal fuse, the thermostat, or the heater itself. To figure out which one it is, you will need to have a multimeter and know how to use it. Again, do an internet search with your model number to find out more. I will eventually be putting up a post on how to use a multimeter. Stay tuned. You can sometimes pick one up for a few dollars at a local hardware store, but for a good one you are going to pay at least $35.

    Nothing happens when I turn it on:

    This can either be the door switch, or the timer. The simplest way to check this out is to set the timer and see if it starts moving over time. If the timer is moving, then it is probably the door switch. The door switch can easily be jumpered out (bypassed) to verify that this is the problem. This gets kind of technical for the average home owner, but if you are up for the challenge, It’s not that difficult. You can also simply replace the door switch. You should be able to find one online for about $10 or less.

    That’s about it. Occasionally the motor will go, or the fan impeller will break, but this is relatively rare.



RSS Feed
RSS Feed
Facebook
Follow us on facebook

Search & Win
Privacy Policy
Money Saving Blogs
Karl Boericke