Posts Tagged ‘frugal’

  1. How to make your own deodorant

    February 2, 2012 by Karl

    Deodorant berry berry berry berry berry

    In this post you will learn how to make stick deodorant.  This will save you money by saving your health.

    I should start off by saying, everything (well almost everything) that I know about home-made deodorant, I learned from my new friend Sarah Herr, who gave me permission to post what she told me.  Thanks Sarah!

    All ingredients should be available locally, but if you want to do it right, you should use nothing but virgin organic coconut oil.  As far as I know the only place that you can get the virgin organic is from Tropical Traditions.

    Recipe:

    1/4 c. arrowroot powder or cornstarch
    1/4 c. baking soda
    5 T. coconut oil
    2 T. beeswax pellets
    8 drops tea trea essential oil (or other essential oil), optional
    1/4 tsp. vitamin E liquid, optional (helps to make it slide on smoother)

    Here’s my video:

    Notes:

    Make sure you clean the old junk out of your deodorant container.  I just pour hot water over them for about 5 minutes until most of it has gone down the drain, and then clean up with a paper towel.

    You may have trouble with some deodorant containers.  Not all of them are made to be filled with a fully liquid mixture (holes will allow it to leak).  Also some of the containers only allow the plastic lift mechanism to go down half way, leaving the lower half of the container being filled with stuff that won’t be used.  In this situation, I recommend that you wait for the mixture to cool first.  Once it has hardened, you can use a spoon to press it into the container, which will not allow it to go into the places you don’t want it to go.

    Please be sure to check out the rest of the The Frugal Berry for other health / money-saving ideas.

    Also don’t be afraid to post a comment if you have questions. Thanks!



  2. Save money by repairing your electric dryer.

    January 11, 2012 by Karl

    Electric Dryerberryberryberryberry

    This article will show you how to save money by repairing your own electric dryer.  Electric dryers are relatively simple machines to fix.  With a little knowledge, the average home owner can fix their drier, no matter what the problem is.  Please note that gas dryers are not something I would encourage the average home owner to delve into.

    Electric dryers can last forever once you know how they work and how to fix them. They only generally have three basic areas that go wrong: The motor & drive belt which rotates the tumbler, the electric heater assembly, and the timer that controls it all. Of course each of the parts in these areas have their own price tag, and the owner needs to decide if it makes more sense to repair it, or replace it.   I would argue that if you can repair it yourself, it is never a good financial decision to replace an electric dryer. The most expensive part can usually be purchased somewhere online for around $100. Usually it is something very simple that goes wrong with one of these machines.

    Here are the most common things that generally go wrong with electric dryers.

    Is there power at the outlet?

    Let’s start with the very simple.  Is the houses circuit breaker tripped? Some circuit breakers actually look like they are on, but are actually tripped. The only way to be sure is to turn it off and then back on again. Unfortunately electric driers use 240 volts, so there is no other simple test to check that you have power at the outlet unless you happen to have a multimeter, and know how to use it. You can set the timer (mechanical timer), to see if it moves, but this isn’t foolproof.

    Dryer turns on, but the drum is not spinning:

    This is the simplest fix of all. It is the belt. Usually you can get the belt for less than $20 locally, or less than $10 online. I would highly recommend replacing the Idler wheel (the wheel that keeps tension on the belt) at the same time. Replacing a belt is a fairly simple procedure, and can usually be done in less than 30 minutes on most dryers. Search for your specific model number in order to find out the procedure for your dryer. Usually it is a matter of turning off the power, lifting up the top, unscrewing the front, and securing the new belt in place. You may need to print out a drawing of the path of the belt, because it can be a little confusing the first time you put one in.

    Dryer runs fine, but it takes forever to dry my clothes:

    This is usually due to lint in the dryer vent. Depending on the length of your dryer vent, this can be simple or more involved. Either way, all you should need in order to take care of this is a screwdriver. A large capacity vacuum would also be handy. Remove the hose from the back of the dryer, and use the vacuum (or your hand) to clean the lint out of the pipes. Remove each section as needed to clean the lint out of there. Make sure the path is clear all the way to the vent cap outside. If there is a lot of moisture mixed in with the lint, then it is possible that the distance of your dryer vent is too long. You may need to put in a booster fan in order to get it to vent properly.

    Dryer turns on, but there is no heat:

    This is usually either the thermal fuse, the thermostat, or the heater itself. To figure out which one it is, you will need to have a multimeter and know how to use it. Again, do an internet search with your model number to find out more. I will eventually be putting up a post on how to use a multimeter. Stay tuned. You can sometimes pick one up for a few dollars at a local hardware store, but for a good one you are going to pay at least $35.

    Nothing happens when I turn it on:

    This can either be the door switch, or the timer. The simplest way to check this out is to set the timer and see if it starts moving over time. If the timer is moving, then it is probably the door switch. The door switch can easily be jumpered out (bypassed) to verify that this is the problem. This gets kind of technical for the average home owner, but if you are up for the challenge, It’s not that difficult. You can also simply replace the door switch. You should be able to find one online for about $10 or less.

    That’s about it. Occasionally the motor will go, or the fan impeller will break, but this is relatively rare.



RSS Feed
RSS Feed
Facebook
Follow us on facebook

Search & Win
Privacy Policy
Money Saving Blogs
Karl Boericke